Calculators

Sourdough Starter Feeding Calculator

Estimate the flour and water to add to a sourdough starter using its current weight and your chosen flour-to-starter and water-to-starter ratios. This simple equal-hydration model assumes the starter already contains equal weights of flour and water.

Loading calculator...

What this Sourdough Starter Feeding Calculator does

The Sourdough Starter Feeding Calculator estimates the combined weight of flour and water to add to an existing starter. Enter the starter’s current weight, then choose how many parts of flour and water to add for each part of starter. The result, labeled Total feed (g), is the total feed weight. It does not show the flour and water amounts separately, so use the formula in this article if you want to measure each ingredient on its own.

The calculator is based on a straightforward ratio model. Its inputs are Current starter weight (g), Flour parts per 1 part starter, and Water parts per 1 part starter. The formula is starter_weight * (flour_ratio + water_ratio). Here, “parts” are weight parts. A ratio of 1 means one gram of ingredient for each gram of starter. For example, a 1:1:1 feeding uses one part starter, one part flour, and one part water by weight.

This model assumes the starter already contains equal weights of flour and water. That is an equal-hydration starter by weight. Actual starter consistency, flour absorption, room temperature, and fermentation conditions can affect how a starter behaves. The estimate describes the feed quantities implied by the ratios. It does not predict when the starter will peak or tell you whether it is ready to bake with.

How to use the Sourdough Starter Feeding Calculator

Weigh the starter you intend to keep and feed. Enter that amount in grams. Then enter the flour and water ratios you plan to use, with each ratio expressed as parts per one part of starter. The defaults are 100 g starter, 1 part flour, and 1 part water. That example corresponds to a 1:1:1 ratio.

  • Use the starter’s current weight after any discard you plan to remove.
  • Enter flour and water amounts as ratios by weight, not by volume.
  • Read the result as the combined grams of flour and water to add.
  • For separate ingredient amounts, multiply the starter weight by each ratio individually.

For instance, if you have 80 g of starter and choose 2 parts flour and 2 parts water, the calculator returns 320 g total feed. That total consists of 160 g flour and 160 g water, because each ingredient amount is calculated from the starter weight separately. The calculation does not include the starter itself in the feed result. To estimate the weight of the complete refreshed mixture, add the original starter weight to the total feed.

Inputs are limited to 10–1,000 g of starter and ratios from 1 to 10, in half-part increments. Those limits keep entries positive and avoid a zero ratio. If your intended feeding falls outside them, use the formula directly with your measured values and keep the units consistent.

How the Sourdough Starter Feeding Calculator formula works

The formula adds the flour and water ratios, then multiplies their sum by the starter weight. Written as separate ingredient calculations, flour is starter weight multiplied by the flour ratio, and water is starter weight multiplied by the water ratio. Adding those two amounts gives the total feed.

Worked example: suppose the starter weighs 100 g, with 1 part flour and 1 part water per part starter. Flour is 100 g × 1 = 100 g. Water is 100 g × 1 = 100 g. The total feed is 100 g × (1 + 1) = 200 g. The mixture after feeding would weigh 300 g, assuming none is spilled or removed, because it includes the original 100 g starter plus the 200 g feed.

Another example uses 50 g starter and a 1:2:2 feeding. The flour ratio is 2 and the water ratio is 2. The total feed is 50 × (2 + 2) = 200 g, comprising 100 g flour and 100 g water. The formula assumes both ratios refer to the same starter weight and both ingredient weights use grams. It does not calculate hydration from an unknown starter composition.

Use cases for the Sourdough Starter Feeding Calculator

A ratio estimate is useful when you want to scale a familiar feeding to the amount of starter you have. If a recipe calls for a particular ratio, the calculator can translate that ratio into a total ingredient weight, provided the recipe expresses its amounts by weight relative to starter. It can also help you compare how a larger or smaller starter quantity changes the feed while keeping the same proportions.

It can support routine kitchen planning. You can estimate how much flour and water to set out, or calculate the feed before refreshing a starter for a baking session. Since the result combines both ingredients, remember to split that total according to the selected ratios when weighing them. If flour and water ratios differ, the total alone does not identify each portion.

Use a kitchen scale for the most direct match to this model. Volume measures vary with flour type, settling, and measuring technique, so cups do not reliably represent a fixed weight. The calculator is an arithmetic aid. Follow the recipe or starter-care method you are using for timing, discard practices, and signs of activity.

Other factors to consider when calculating sourdough starter feed

Starter hydration is important when interpreting a feeding ratio. This calculator assumes the existing starter has equal weights of flour and water. If your starter is stiffer or more liquid, the formula still estimates the new flour and water amounts from the entered ratios, but it does not describe the final hydration of the refreshed mixture. To calculate that accurately, you would also need the starter’s existing flour and water composition.

Flour type can change how a feed feels and ferments. Whole grain and rye flours may absorb water differently from white bread flour. Temperature, the culture’s activity, feeding schedule, and the amount of starter retained also affect fermentation. Those factors do not change the arithmetic here, but they can change how the mixture behaves in practice.

Before feeding, decide how much starter to retain and weigh that amount after discarding. Then use a ratio appropriate to your recipe or established routine. Keep notes on the quantities and conditions that work in your kitchen. The result is a clear ingredient estimate, while readiness and timing still depend on observation and your baking method.

FAQ

Does the result include the starter itself?

No. Total feed is the combined weight of the added flour and water. Add the current starter weight to estimate the full mixture weight after feeding.

What does a 1:1:1 feeding mean?

It means equal weights of starter, flour, and water. With 100 g starter, that ratio calls for 100 g flour and 100 g water, or 200 g total feed.

Can I enter cup measurements?

The calculator expects grams and ratios by weight. Weighing ingredients gives a consistent result. A cup conversion would depend on the ingredient and how it is measured.

Does it tell me when my starter is ready to use?

No. It estimates feed quantities only. Fermentation time and readiness depend on factors such as temperature, flour, starter activity, and your recipe.

What if my starter is not equal hydration?

You can still use the ratio arithmetic to estimate added flour and water, but the stated equal-hydration assumption will not describe your starter. The calculator does not determine the refreshed mixture’s final hydration from an unknown starter composition.

Written by

buzzonslaters.com Editorial Team

Editorial team

Independent editorial coverage of baking & coffee.